Halco 81066 MR16WFL35/827/LED MR16 4.5W 60 Deg. 2700K GU5.3 ProLED

Halco 81066 MR16WFL35/827/LED LED MR16 4.5W 60 Degrees 2700K GU5.3 ProLED

Notes:
• This device is intended for use on Class 2 circuits only. Use only on low voltage circuits with output ranges identified in specifications. These lamps may be dimmed using analog dimmers and magnetic transformers. May not be compatible with all dimmers and/or transformers and should be tested in application for compatibility prior to full installations on circuits using such devices. Not for use on timing devices, photo sensors or occupancy sensors.
• Caution: Risk of electric shock. Never disassemble or modify the bulb, no user serviceable parts inside.To avoid burns, do not touch the bulb during operation and allow to cool completely after switching off. This device is not intended for use in emergency exit fixtures. This device complies with Part 18 of the FCC rules. This product may cause interference with other devices. If interference occurs, change the location of the products involved.
• Approved for use in sealed metal landscape fixtures.
• Do not use in totally enclosed fixtures or IC or ICAT rated recessed cans.
• Dimmable lamps dim down to 5%, but are limited by the dimming device range.
• Lamp is UL approved for damp locations.

Warnings:
• Risk of electric shock
• Never disassemble or modify the bulb
• To avoid burns, do not touch the bulb during operation and allow to cool completely after switching off
• This device is not intended for use with emergency exit fixtures
• If this product causes interference with other devices, change the location of the products involved
• This dimmable lamp may not be compatible with all dimmers, timing devices, occupancy sensors, and photo sensors, please check the website www.halcolighting.com/ProLEDdim for up-to-date dimmer compatibility information
• Suitable for use in sealed metal landscape fixtures; where it is protected from the elements
• Dimmable lamps dim down to 5%, but are limited by the dimming device range
• Use only on 10-15 volt circuits
• UL rated for damp location